Interface
updates
settings
Controller
Interface
system
Graphics
updates
6. Software Updates
NOTE: The controller will check for software updates daily (around
midnight), and will automatically download and install if needed.
Software can also be updated manually from the interface or the
controller Web pages.
From the Interface
On the [home] menu, touch the [settings] icon.
Go to [system], then to [updates].
A pop-up screen will indicate if updates are available for any
connected system components.
From the Web Pages
On a computer or tablet connected to the same router as the
controller, open a browser and enter the Web IP address. Refer to
the "Obtain the IP Address" section of this guide.
Click on the [Service] tab, then on [Updates].
Click [Check for Updates] to download the latest software for any
connected system components.
If updates are available, the controller will automatically
download and install the software.
Kohler Co.
Control
Diagnostics
OS
Upload
ok
11
Web Page
Settings
Service
Updates
Check for Updates
Browse...
1218131-2-A