Operation - Klarstein HOT SPOT WAVE Manual De Instrucciones

EN
22

OPERATION

1. Insert the plug into the socket. Also make sure that the main switch is in the OFF
position.
2. Press the main switch to turn on the unit.
3. Press and hold the MODE and SET buttons for 10 seconds to reset the program (this
step is only necessary when you switch on the unit for the first time).
4. Manual mode: the display shows the HAND indicator and the preset room
temperature is 22°C. Use the (+) and (-) buttons to set the desired room
temperature. The temperature can be set between 5-32°C. The unit will start as
soon as the set temperature is higher than the room temperature. At the same time,
the heating indicator lights up. When the set temperature is reached, the appliance
switches off automatically. If the room temperature drops by at least 3 °C, the unit
switches on again.
5. Set the time and day of the week: Press the SET button and use the (+) and (-)
buttons to set the time and day of the week.