AirSelfie AIR PIX Guia De Inicio Rapido página 2

AIR PIX comes with a partial charge
so you're ready to fly right out of the box!
1
Download the intuitive, One-Touch AirSelfie app from
the Apple App Store or Google Play.
Be sure to download the AirSelfie app NOT the AirSelfie 2 app.
2
Turn your AIR PIX aerial camera on by pressing and holding
the button on the side by the USB port.
3
Launch the app, press "Select an AirSelfie" and then
select "AIR PIX".
4
Follow the prompts to connect your phone to your
AIR PIX via a wi-fi connection through the Settings
app on your phone.
5
Next you'll want to calibrate your AIR PIX. This is easy
too. Simply place the device on a flat horizontal surface
and press CALIBRATE.
6
Once calibrated, select how you would like to fly by
scrolling along the bottom, aligning the mode you want
with the gold arrow.
7
By default the app has selected "MANUAL" mode which
allows you to pilot AIR PIX by using a few familiar swipes
of the joystick and movements with your phone. See the
full Owner's Manual for complete instructions.
8
First select either Indoor or Outdoor mode depending
on where you intend to fly.
9
To launch your AIR PIX in MANUAL mode place the
AIR PIX on your open palm or on any flat surface and
with the logo up and the camera pointing towards you.
Press the launch button located on the lower right side
of the view finder on your screen and your AIR PIX will
take flight.
10
To land AIR PIX simply press the Land button located
to the left of the Launch button.
Here are a few important tips to remember:
• For best performance fly in wind protected areas.
• Fly your AIR PIX away from high voltage power lines, buildings, or any potentially
dangerous areas and in accordance with your country's civil aviation regulations.
• Do not fly in adverse weather or environments with poor visibility.
STEP 1
STEP 2
STEP 4
Connection to AirSelfie
• Power on your AirSelfie
• Open settings
• Opne Wi-Fi section
• Connect to the open network whose
name starts with "AIR PIX______"
• Have fun!
Cancel Open Settings
STEP 6
MANUAL AUTO-FLY
STEP 9
STEP 10