KIKKA BOO WINKS Manual De Instrucciones página 7

• Rechargeable batteries are to be removed from the box before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not use rechargeable alkaline batteries in a Ni-Cad or Ni-Mn battery charger.
• Please use the correct disposal method for batteries.
• Remove batteries before putting the product into storage for a prolonged period of time.
• Weak batteries cause erratic product operation, including distorted sound, dimming or failed lights, and slow or non-working
motorized parts. Because each electrical component requires a di erent operating voltage, replace the batteries when any
function fails to operate.
• Do not dispose of product or batteries in re, batteries may explode or leak.
1. PARTS LIST
Make sure all parts are available before assembly. If any part is missing, please contact the producer. No tools are required for
assembly.
2. ASSEMBLY
Follow steps 2 to 9.
10. USING THE SWING CONTROL MODULE
1. ouch the power switch to power the control Module.
2. Side-to-side movement function, 5 ideal angles with LED light.
3. Touch the Music button to begin music. All 15 songs will play in turn, or touch as needed to select the desired song.
4. Touch the Volume Control switch as needed to turn o or adjust the volume for music.
5. Press to sequence to the desired timer setting of 15,30,or 45 minutes. If you do not select a timer setting, the sway and/or
music function uses a default time of 60 minutes for auto-shuto .
6. Insert the USB disk into the USB connector, music from USB will be set to auto-start, the music function that comes with the
product cannot be used. Other functions work properly.
7. Bluetooth device "swing", smartphone connectivity and indicator lights up, the music function that comes with the product &
USB cannot be used. If you do not select a timer setting, Bluetooth uses a default time of 60 minutes for auto-shuto .
11. USING AN ADAPTER
Suitable for most mobile phone adapters (Product Not Included) , Output DC: 6V/1A
MAINTENANCE
This product requires regular maintenance to keep it in good working order. Regularly check all parts of the product to ensure
that they are operating correctly and for signs of wear or damage. Only replacement parts supplied or recommended by the
manufacturer should be used.
CLEANING
Refer to care label on the product for cleaning instructions for fabrics. Clean metal or plastic components with mild detergent
and warm water. Never use abrasive, ammonia based, bleach based or spirit type cleaners. Ensure the
product is fully dry before use or storage.
ENGLISH