Biohit Tips; Unpacking; Personal Identification - Biohit mLINE Manual Usuario

2.

Biohit tips

The full range of Biohit pipettor tips are recommended for use with
m
Biohit LINE pipettors. Biohit standard tips are made of virgin
polypropylene. Biohit also offers a full range of filter tips. Biohit
standard tips are available as bulk packages, space saving refill
systems and autoclavable (121°C, 20 min, 1 atm) trays. Pre-sterilized
tips in trays are also available. (Fig. 1.)
Fig. 1.
3.

Unpacking

m
The Biohit LINE pipettor package contains the following items:
1. Pipettor
2. Tip
3. Caps for colour coding
4. Calibration tool (also tube and ID window opener)
5. Pipettor holder
6. Identification tags
7. Safe-Cone filters (pipettors >10 µl)
8. Grease
9. Instruction manual
10. Performance certification in accordance with ISO 8655-6
Please check that all items are included and that no damage has
occurred during shipment.
4.

Personal identification

m
Each Biohit
the ID window which is placed on the finger support.
1. Remove the ID window by using the calibration tool (Chapter 6.).
2. Remove the tag and mark the identifying information on it.
3. Position the tag on place and clip the window back into place.
LINE pipettor can be identified with a tag located under
4