Goobay 95347 Manual De Usuario página 2

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 5
User Manual
EN
4 port USB-HUB 3.0
1 Safety instructions
The user manual is part of the product and contains important information for
correct use.
• Read the user manual completely and carefully before use.
The user manual must be available for uncertainties and passing the product.
• Keep this user manual.
Notes for network separation
The product has no power switch and may be used only in easily accessible
outlets to quickly remove it in an emergency and after use.
Voltage-free only with pulled plug.
• In case of emergency, during thunderstorms and after use, pull the product
on its plug housing! In case of emergency, during thunderstorms and after
use, pull the product on its plug housing!
• Do not open the housing.
• Do not modify product and accessories.
• Do not short-circuit connectors and circuits.
A defective device may not be put into operation, but must be disconnected
from mains and protected against further use.
• Use product, product parts and accessories only in perfect condition.
• Avoid stresses such as heat and cold, moisture and direct sunlight, micro-
waves, vibrations and mechanical pressure.
• In case of questions, defects, mechanical damage, trouble and other pro-
blems, non-recoverable by the documentation, contact your dealer or pro-
ducer.
Not meant for children. The product is not a toy!
• Secure packaging, small parts and insulation against accidental use.
2 Description and function
2.1 Product
This product is a USB 3.0 splitter to which up to 4 USB devices can be con-
nected via a USB socket. It is used for data transfer and interface expansion
of your computer.
2.2 Scope of delivery
4 port USB-HUB 3.0, Power supply unit, Connection cable, User Manual
2.3 Operating Elements
1 ON/OFF switch
4 USB outputs
2 DC socket
5 Power supply unit
3 USB input
6 Euro plug
2.4 Specifications
Article number
Connections - Inputs
Connections - Outputs
Input
Max. data transmission rate
Dimensions
Weight
Power supply unit
Connections
Input
Output
Average active efficiency
No-load power consumption
Dimensions
Weight
REV2021-04-28
Subject to change without
V1.0aw
notice.
7 DC plug
8 USB-A 3.0 plug
95347
USB-A 3.0 socket, DC socket
4x USB-A 3.0 socket
5.0 V
, 4.0 A max.
5 GBit/s
97.3 x 56.2 x 19.8 mm
47 g
Euro plug (type C, CEE 7/16),
DC plug (3.5 x 1.35 mm)
100-240 V
, 50/60 Hz, 0.5 A max.
5.0 V
, 4.0 A, 20.0 W
83.9 %
0.06 W
90 x 40 x 67 mm
91.5 g
Cable length
Connection cable
Connectors
Cable length
Weight
3 Intended use
We do not permit using the device in other ways like described in
chapter „Description and Function" or in the „Safety Instructions".
Use the product only in dry interior rooms. Not attending to these
regulations and safety instructions might cause fatal accidents, injuries, and
damages to persons and property.
4 Preparation
1. Check the scope of delivery for completeness and integrity.
2. Compare the specifications of all used devices to ensure compatibility.
5 Connection and operation
1. Connect the DC plug of the power supply unit to the DC socket of the HUB.
2. Connect the USB input of the HUB to your PC via the connection cable.
3. Connect up to four USB end devices to the USB outputs of the HUB using
appropriate USB cables.
4. Turn on the HUB by setting the ON/OFF switch to ON (I).
The ON/OFF switch applies an additional voltage to the outputs, which can
be useful when using devices without their own power supply. The input al-
ways remains free from external potential.
5. Switch off the HUB by setting the ON/OFF switch to OFF (o).
6. Disconnect all cable connections after use.
6 Maintenance, Care, Storage and Transportation
The product is maintenance-free.
NOTICE!
• Always unplug the power cord before cleaning.
• Only use a dry and soft cloth for cleaning.
• Do not use detergents or chemicals.
• Store the product out the reach of children and in a dry and dust-protected
ambience when not in use.
• Store cool and dry.
• Keep and use the original packaging for transport.
7 Disposal instructions
According to the European WEEE directive, electrical and electronic
equipment must not be disposed with consumers waste. Its
components must be recycled or disposed apart from each other.
Otherwise contaminative and hazardous substances can damage the
health and pollute the environment.
As a consumer, you are committed by law to dispose electrical and electronic
devices to the producer, the dealer, or public collecting points at the end of the
devices lifetime for free. Particulars are regulated in national right. The symbol
on the product, in the user manual, or at the packaging alludes to these terms.
With this kind of waste separation, application, and waste disposal of used
devices you achieve an important share to environmental protection.
WEEE No: 82898622
8 Symbols used
For indoor use only
Alternating current
Direct current
- 2 -
Pillmanstraße 12 | 38112 Braunschweig | Germany
95347
1.2 m
2x USB-A 3.0 plug
0.6 m
31 g
Material damage
IEC 60417- 5957
IEC 60417- 5032
IEC 60417- 5031
Goobay® by Wentronic GmbH

Publicidad

Tabla de contenido
loading

Tabla de contenido