Remote Control; Battery Exchange - Seltron T1 Manual Del Usuario

Remote control

The day temperature mode can be remotely activated with a tele-
phone device.
For analogue telephone line is available device G1-D. Device G44
is intended for remote control with GSM mobile telephone.

Battery exchange

Empty batteries are indicated with the low
contrast display. We suggest the battery
replacement every 2 years. T1 is supplied
with two alkaline batteries 1.5 V type
AAA. Battery socket is inside the T1.
To remove thermostat from the wall plate,
do the following. Hold thermostat in height
of keys and pull it towards yourself
(Picture 17 - OPEN). After battery ex-
change, put T1 back on the wall plate, by
doing the following. Hook T1 on top and
push it with bottom towards the wall plate
(Picture 17 - CLOSE).
i
Battery exchange should be done within 20 seconds. In other case you
will have to set the accurate time again.
Command to quick save and quit (Escape)
Every time you wish to quick store and quit set-up, hold key
press key . Release both keys after you hear a beep.
i
All modifications you made, are stored.
12
Picture 17
and
USER MANUAL