Steren BAF-1280 Manual De Instrucciones página 2

Before using your new Speaker Box with amplifi er, please read this Before using your new Speaker Box with amplifi er, please read this
instruction manual to prevent any damage. Put it away in a safe instruction manual to prevent any damage. Put it away in a safe
place for future references. place for future references.
INSTRUCTIONS
Before connecting the speaker, make sure the system is off and the
controls on the minimum level. Otherwise the system could presents
damages.
1.- Plug the polarized cable to electric power and to the speaker.
2.- Plug the Microphone on the "MIC" input with a 6,3mm or Cannon
connector.
3.- Plug an auxiliary system (CD, DECK, MP3, DVD, etc) in "LINE IN"
input
4.- Turn on the systems. A green LED light up in the speaker to indicate
that is on
5.- Set the volume on the middle level in the MIC and LINE IN inputs
6.- Gradually increase the master volume (place on the right side of
LINE OUT connector)
7.- Set TREBLE and BASS controls to equalize the sound.
8.- A red LED light up when the system detects an overload. You must
diminish the volume level.
Caution
Do not place the microphone near to the speaker, it can cause Do not place the microphone near to the speaker, it can cause
feedback echo and could damage the system. feedback echo and could damage the system.
ENGLISH-02