How To Use - Steren ANT-HD 070 Manual De Instrucciones

How to use

1.- Connect the coaxial cable at the antenna (use the end with protector),
and insert the other end of the cable in the power inserter.
2. Connect the power inserter to TV.
3.-Connect the power adapter to an outlet and insert it on the power inserter.
4.- Turn the TV on.
5.- In your TV, perform a scan to find digital or HD channels.
6.- Set the antenna until you have a good signal reception.
Note: Remember, your TV must have a High Definition TV tuner to
watch digital signals.
12