Be Cool COCOON Manual De Instrucciones página 25

GROUP 0 SAFETY MOSES BASKET
4
-Put the backrest (-13-) of your COCOON to its lowest
position.
1
-Place the handle (-1-) in position A3 (car).
7 -Place your baby in a reclining position. Carefully fas-
ten and adjust the abdominal belt (-4-) around the baby's
waist and pelvis.
8-9-10 -Decide the position of the COCOON in your
car (one of the three possible configurations).
In extreme positions, we recommend that you place the
COCOON so that the baby's head is as far away from the
car doors as possible.
11 -Fasten the two car seat belts which correspond to the
location you have chosen for your COCOON.
• INSTRUCCIONES • GEBRAUCHSANWEISUNG
• INSTRUCTIONS • INSTRUCTIONS
12 -Fasten the two spring-loaded clasps (5) at both ends
of your COCOON.
13 -Open the clip on the spring-loaded clasps (5) to insert
the belt, as shown in the figure.
14 -Thread the abdominal area of the belts of your car,
going round the clip on the spring-loaded clasp ( 5).
15 -Close the clip and its lock on both spring-loaded
clasps (5)
16
-Tauten the whole retaining system, pulling the belt
area of your area as shown in the figure, on both spring-
loaded clasps (5). To release the whole system, simply
open the clips on the spring-loaded clasps.
• INSTRUÇÕES
• ISTRUZIONI
25