Operation - Steren RAD-500 Manual De Instrucciones

OPERATION

1. Turn the radio on.
2. Select a channel operation, or press and hold the button exploration
(SCAN) until the LED indicator flashes green, start the search for signal and
will stop when the device found a signal active.
Press the button PTT channel to communicate to signal active and exploration
will be deactivated.
If you want to leave exploration mode new press and hold the SCAN button.
3. To start communicating, just press and hold the PTT button, the LED indicator
lights up red. While speaking, keep the unit in an upright position and at a
distance of 2.5 cm from the mouth. When you want to finish the conversation,
release the button PTT.
4. For the reception signal, the LED indicator turns on green.
5. Adjust the volume level according to your needs.
12