Basic Operation; Adjust The Volume; Channel Selection - Steren RAD-320 Manual De Instrucciones

BASIC OPERATION

To communicate, turn on set volume and select the same channel on both radios
On / off
To start the device turn the switch, clockwise, until you can hear a tone.
To turn off the radio, move the switch counter clockwise, until you hear a tone.

Adjust the volume

Once the radio is turn on, adjust the volume level turning the knob clockwise.

Channel selection

Turn the channel selector knob. The device emits a message of the selected channel.
Reception and transmission
To transmit press and hold the PTT button and speak with a normal tone voice. The in use
LED lights in red color in the transmitter and green color in the receiver.
Be sure that both radios are into the range* to avoid bad communication is cutted.
Release the PTT button to receive a call.
*Up to 26 miles under optimal conditions.
19