Daily Use; Clean The Plastic Parts - Kohler Clarity Explore Instrucciones Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Daily Use

1. Remove the lid and hang it on the side of the upper container.
2. Fill the upper container with water. Do not add more water than fits in the
lower container.
3. Replace the lid on the upper container.
4. To dispense water, press down on the spigot handle, or flip the handle back
for continuous flow.
NOTICE: Always use clean water cups for drinking.
CAUTION: Risk of contamination. If water in the
lower container is not used for several days, discard
or refilter the water.
If residue is present, clean the plastic parts and/or clean
filter cartridge before filtering water again.
1383737-2-B
Press down
Flip back for
to dispense.
continuous flow.
6
Kohler Co.

Clean the Plastic Parts

Clean the upper and lower containers weekly. Clean more often if the water has
more dirt in it.
CAUTION: Risk of product damage. Use care when handling the cartridge.
1. Carefully remove the filter cartridge from the upper container by unthreading
the nut on the underside of the container while holding the filter cartridge.
IMPORTANT! Wash hands with soap before cleaning the containers.
2. Use a clean, non-abrasive sponge soaked in vinegar for 2 minutes to
thoroughly scrub the entire inside surface of the lower chamber. Clean the
lower chamber before the upper chamber.
3. Use a clean, non-abrasive sponge soaked in vinegar for 2 minutes to
thoroughly scrub the entire inside surface of the upper chamber. Clean the
lower chamber before the upper chamber.
4. Reassemble the filter cartridge to the upper container with the rubber washer
between the cartridge and the container. Hold the cartridge while tightening
the nut.
Kohler Co.
7
1383737-2-B

Publicidad

Tabla de contenido
loading

Tabla de contenido