BGS technic 8365 Manual De Instrucciones página 3

Dispositivo para el inflado de neumáticos de automóvil (booster)
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

SPECIFICATIONS
Maximum pressure: approx. 10 - 12 bar
Working pressure: 8 bar
Tank capacity: 19 l
Weight: approx. 12 kg
Dimensions: Ø 260 x w 420 x h 300 mm
(dimensions excl. filling cone)
INTENDED USE
This tire booster helps filling tires with too close beads as a result of prolonged storage. In those
cases the distance between tire bead and rim edge is too big and the tire cannot be filled
conventionally. By impulsive deflation of the booster, the tire beads are pushed outwards and against
the rim edge.
SAFETY ADVICE
Check the tyre booster for a proper technical state.
All components and fittings should be checked for tight fit and correct functioning.
In case of malfunction, if components damaged or loose the booster must not be operated.
Fill the booster with clean, dry and oil-free compressed air only.
The air tank is equipped with a safety valve that opens at an air pressure of approx. 10 to 12
bar, the tested and recommended maximum working pressure.
Do not alter or modify the air tank or any other components of the booster. Unauthorized
modifications may cause severe injuries.
Never exceed the recommended maximum air pressure.
Fill up the booster's air tank at normal surrounding temperatures.
The device should be stored in a completely deflated state, the filling valve opened.
Use the booster for designated purposes, only.
Never use this device for cleansing.
Never point the tire booster's exhaust on other people.
Always wear appropriate hearing protection when operating this device. This includes
bystanders, also. Operating the booster without any hearing protection may harm your ears and
may cause hearing loss, since the impulsive, percussion type deflating process produces a
noise level of more than 100 dB.
Do not use inflammable cleanser to clean the tires while using this booster.
Harmful debris like splinters, dust or rust particles might be hurled around when deflating the
booster. To avoid resulting eye injuries, always wear safety goggles.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Car Tyre Booster
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 8365
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed

Publicidad

Tabla de contenido
loading

Tabla de contenido