4.) Pull out the locking pin in order to unlock the Pedal Trainer RFM
digital after use to fold it up and stow it away, saving space. (see Fig.
4 and 5)
5.) The counter with display – for "reset" please press button C for a few
seconds.
RPM
Scan Mode
Time:
Press button C 1x : arrows next to CNT and Time
The device displays the total rotations and the
elapsed time. It does not stop when you stop
pedalling but continues to run!
UPM:
Button C 3x press : Arrows next to CNT and RPM
The device displays the total rotations and die
rotations/minute.
The device shuts down after around 3 minutes' idle time.
Button C
Calorie consumption:
Press button C 2x: Arrows next to CNT and CAL
The device displays the total rotations and die calorie
consumption.
Scan Modus:
Button C 4x press : Arrows next to CNT and RPM and
Scan
The device displays the total rotations and alternately
the
elapsed
time,
calorie
rotations/minute. Switches after about 10 seconds.
®
Rotations (constant display)
Clock (runs continuouly after start)
Calorie consumption
consumption
and