Hamilton Beach BrewStation Manual De Usuario página 7

How to Clean Mineral Deposits and Buildup
Clean urn after every 15 to 20 cycles to remove mineral deposits and buildup, or more frequently in areas with hard water. Fill the urn with equal parts cold
water and vinegar: 6 cups (1.4 L) each of cold water and white vinegar. Assemble urn with stem assembly, coffee basket, coffee basket lid, and twist-off lid.
Plug into outlet. Let unit go through the brew cycle. When brewing has stopped, let sit another 15 minutes. Unplug and drain by using the coffee dispensing
bar. This will clean both the urn and the tank/seal filter assembly. Let cool. Follow steps for "How to Clean."
How to Remove Discoloration
40
1
Add water to 40-cup fill line.
5
2
Replace stem assembly and
coffee basket. Add 2 Tablespoons
(30 ml) cream of tartar.
TO CLEAN HEAT WELL: Fill the urn half-full with hot water. Add a
drop of liquid dishwashing detergent and wash the inside of the urn.
Use the heat well cleaning tool or scouring pad, clean the inside of
the heat well. This part must be properly cleaned to maintain the
proper operation of the urn. Do not immerse in water.
3
Replace lid. Plug in and let
percolate one cycle.
4
After one cycle, unplug and let sit
15 minutes. Drain liquid from urn.
Let cool; then clean. See "How to
Clean" section.
7