Height Adjustment - EDM 33968 Instrucciones Importantes De Seguridad

33968
REF.
Guidelines for use of batteries
If the remote control will not be used for a long period of time, remove the batteries from
the battery compartment. x The remote control uses one CR2025 battery.
Clean battery contacts and also those of the device prior to battery installation
Ensure the batteries are installed correctly with regard to polarity, matching +/- sides of the
battery to
corresponding indications on the remote control.
Remove used and dead/discharged batteries promptly.
IMPROVED AIR CIRCULATION
This fan has 3 functions which will allow you to better customize your preferred air comfort as
well as improve air circulation in the room:
A. OSCILLATION:
To activate the oscillation function for widespread breeze distribution, press
turn off the oscillation function for a targeted breeze setting, press again. Controlling the
oscillation can be done while the fan is operating.
B. TILT:
To tilt the fan head so that the breeze is targeted at an angle, steady the motor housing of the
fan with one hand and grip the fan grille with another. Carefully tilt the head of the fan as
depicted in until it reaches the desired angle. Be careful as to not tilt the head back further than
it is intended to go, doing so will damage the unit.
NOTE: The fan must be turned off when performing this adjustment.
C. HEIGHT ADJUSTMENT:
To adjust the height of the fan, grip between the upper column (#8) / adjustable column (#12)
and loosen the height adjustment locking nut (#13). Extend or lower the adjustable column to
increase or decrease the height of the fan. Once the fan is at a comfortable height, tighten the
height adjustment locking nut (#13).
NOTE: The fan must be turned off when performing this adjustment.
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
OPERATING INSTRUCTIONS
SPECIFICATIONS
MODEL / SKU
voltage (V)
wattage (W)
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
PDFJY16DB
120V AC, 60Hz
55W
the button. To