Hardware Connection - Computer - Itworks CPL500Mpbs Guia Del Usuario

2.2 Hardware Connection – Computer
For those computers you wish to be networked by Powerline Adapter, each of the
computers must be properly connected with a Powerline Adapter through an
Ethernet (RJ-45) cable.
Following those steps to properly connect the Powerline Adapter to your computer:
①
Connect one end of the provided Ethernet (RJ-45) cable to the Powerline
Adapter's Ethernet port.
Connect the other end of the Ethernet (RJ-45) cable to you computer's LAN
②
port.
③
Plug the Powerline Adapter into a wall socket next to the computer.
④
Turn on your computer.
⑤
Check and confirm that the Power LED and Ethernet LED on the Powerline
Adapter are ON.
The hardware connection mechanism is shown below:
EN-8