Description Of The Device; Cleaning And Maintenance; Technical Data - Adler europe AD4124 Manual Del Usuario

21. Do not take the juicer apart when it is connected to a power outlet.
22. Do not use abrasive washing liquids or washcloths.
23. The device cannot work longer than 20 minutes without a break.
24. Do not put any hard materials into the feeder, like: large seeds, ice or frozen products.
25. It is recommended to dismantle the juicer immediately after use and wash all the
elements.

DESCRIPTION OF THE DEVICE

1. Pusher
3. Retaining ring
5. Pulp container
7. LCD display
8b. Reducing rotation speed button
10. Latches of lid
12. Juice container
ASSEMBLY
1. Wash the parts of the machine that will have direct contact with fruits and juice (1-5).
2. Place the pulp container (5) on the location reserved for it in the upper part of body paying attention to the 4 projections in the base
of the container.
3. Place the sieve (4) in a container for pulp (5).
4. Place the cover with feeder (2) on the container (5) correctly.
5. Lock the lid with latches (10).
6. Place the pusher (1) in the feeder (2).
7. Place the juice container (12) under the funnel.
USE
1. Place the juicer on a smooth, flat and stable surface.
2. Wash fruits or vegetables that you want to use. If fruits are too big for feeder (2), cut them into smaller pieces.
3. Connect the juicer to power. A flashing light in the button (9) means the device is connected to the power supply. Start the juicer by
gently pressing and holding the switch (9) for approx. 4 seconds - this system protects children from starting the machine accidentally.
After it is switched on, the display (7) will show a counter with working time (00:00). NOTE: Incorrectly assembled unit (without locked lid
latches) will not turn on.
4. On both sides of the power button (9) there are buttons of rotation speed control (8) to slow down the speed (for soft fruits and
vegetables) and increasing speed (for harder objects). Pressing button (8a) will start the device. The machine has 5 modes.
5. Juicer should not be operated with an empty feeder for longer than 30 seconds.
6. If the juicer locks up during operation because it is too full, you should disconnect the device from the mains, remove the items and
clean it manually.
7. Pressing the switch (9) or multiple pressing of the button (8b) during or after the operation of the device will turn device into standby
mode. In this case, restart the device, pressing the button (8a).
8. To completely switch off the appliance after use, press the switch (9) and unplug the power plug.

CLEANING AND MAINTENANCE

1. For easy cleaning - immediately after each use rinse removable parts under running water. After rinsing, leave the components to dry.
2. All removable parts can be washed in hot water with dishwashing liquid.
3. Sieve (4) should be rinsed no sooner than approx. 10 minutes after finished work, in warm water with a little dishwashing liquid.
4. Do not immerse the sieve (4) in bleaching liquid.
5. Sieve (4) is an element that can easily be damaged, always treat it gently.
6. In order to thoroughly clean the sieve (4) use the attached cleaning brush (11).
7. Wipe the engine cover with a soft cloth.
8. Plastic components may be discolored by juice. Wash them immediately after use.
9. All metal parts should be thoroughly washed and dried.
NOTE: Never immerse the engine unit in water, nor rinse it under the tap.

TECHNICAL DATA

Power supply: 220-240V ~ 50/60Hz
Power: 800W
Max power: 2000 W
Max. continuous operation time: 20 min
Min. time interval between cycles of operation: 60 min
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance
should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this
appliance in the common waste bin.
ALLGEMEINE SICHERHEITSVORSCHRIFTEN LESEN SIE AUFMERKSAM WICHTIGE
ANWEISUNGEN BEZÜGLICH DER SICHERHEIT DER BENUTZUNG BEWAHREN SIE
2. Cover with feeder
4. Sieve
6. Drive shaft
8a. Increasing rotation speed button
9. On / Off switch (with safety lock)
11. Cleaning brush
13. Lid of container
DEUTSCH
DEUTSCH
4