Quickstart; Function Buttons - NuWave Brio 6Q Manual Del Usuario

ASSEMBLY GUIDE
2

QUICKSTART

Function Buttons

ON/OFF: The ON/OFF button turns the unit on and off and
stops all cooking functions.
Switch from Fahrenheit to Celsius
• Press the TEMP Arrow Key + SEAR to change the
Temperature Format from °F (default) to °C (Celsius).
Press TEMP Arrow Key + SEAR again to switch from °C
(Celsius) to °F (Fahrenheit). Degree adjustments for °F
are in 5° increments and °C are in 1° increments. They are
adjusted with the [↑] and [↓] buttons.
Note: Switching the Temperature Format can only be
done during setting. It cannot be done while cooking. If the
user switches to Celsius, the unit will stay Celsius even if
unplugged until it is changed back.
START/PAUSE: When the START/PAUSE button is
pressed, the unit begins or pauses cooking. The START/
PAUSE button is also used to mute and unmute the Brio's
beeping sounds for quiet operation, if desired.
[↑] & [↓] Buttons: Use the arrow buttons to adjust
temperatures and times.
WATTS: The unit comes with three (3) wattage adjustments
(900, 1500 & 1800). Press the WATTS button to change the
12 12
assembly guide
QUICKSTART
running wattage the unit will use. When the unit is turned off
and/or unplugged, the unit will run at the wattage previously
used when plugged in and turned on.
GRILL: Press GRILL, choose between 9 levels of cooking.
Level 4 is default. Choose pressing [↑] & [↓] Buttons (either
Temp or Time). Each level determines level of doneness,
see GRILL section under INSTRUCTIONS for a detailed
chart. After selecting the level of cooking, press START/
PAUSE to start grilling.
For grilling with the Digital Probe, see the GRILL section
under INSTRUCTIONS.
STAGE: Use the STAGE button set to up to five (5) different
cooking parameters. Cooking temperatures and times can
be adjusted for each stage of cooking using the TEMP &
TIME buttons and the [↑] and [↓] buttons.
PREHEAT: Use the PREHEAT button to preheat the unit
before cooking. Use the [↑] and [↓] buttons to adjust the
temperature before or during preheat. To cancel the preheat
function press the PREHEAT button anytime.
SEAR: The SEAR button is used to cook at high temperature
for a short amount of time. Use the SEAR button to "sear"
foods directly before and/or after the regular cooking cycle.
Use the [↑] and [↓] buttons to adjust the temperature and
time (up to 15-minutes) before or during the searing cycle.
WARM: Use the WARM button to keep your food warm after
cooking or when you simply want to keep something warm
for an extended amount of time. Use the [↑] and [↓] buttons
to adjust the warming temperature and warming time. Press
the WARM button to cancel the warm cycle.
PROGRAM: The unit comes with 100 pre-programed
cooking recipes along with an additional 50 memory
slots allowing you to add your own unique recipes. Use
the PROGRAM button to recall and save programmed
recipes.
PROBE: Use the PROBE button to set the Digital
Temperature Probe's target temperature as well as to view
the foods internal temperature during cooking. Use the [↑]
and [↓] buttons to adjust the Digital Temperature Probe
target temperature.
13 13
nuwavenow.com nuwavenow.com