Other Functions; How To Upgrade Camera Firmware And Default Loading - Urmet 1093 Guía Rápida De Configuración

5

OTHER FUNCTIONS

5.1

HOW TO UPGRADE CAMERA FIRMWARE AND DEFAULT LOADING

To upgrade the firmware version of the IP cameras connected to the NVR, copy the camera upgrade file to PC. The last
version of the update file can be downloaded to PC from the Urmet website (www.urmet.it), following the path:
"DOWNLOAD -> SOFTWARE -> Technical software -> SECURITY -> CCTV (Firmware)". Registration to the website is
necessary to access the download section.
For further info please send a request mail to URMET customer service: cloud@urmet.com
After having saved the upgrade file in a folder of the PC, open the web page of the NVR on Internet Explorer in [Remote
Setting Advanced Firmware Update Firmware Update IPC]. Then select the update file path:
select the channels to which the cameras to be upgraded are connected (also more than one) press "Start" and wait for
at least 5 minutes for the NVR to complete the selected camera upgrading process:
DS1093-155A 38