CANGAROO XD-D202 Instrucciones Para El Uso página 14

7.On Figure 3 is graphically shown the sequence of the process: with 1 is shown the automatic mode.
On 2 is shown how the automatic sterilization continues to disinfection. And on 3 is illustrated how
automatic drying is activated and the 60 minutes continuity of the mode.
B. Disinfection Mode – Figure 4:
1.Measure exactly 140ml filtered water and pour it in the reservoir in the base of the sterilizer.
2.Attach the bottle stand on the base of the sterilizer and then attach the main body. sterilizer. Place
the bottles upside down on the bottle stand.
3.After that attach the pacifier shelf to the main body and place in it the pacifiers and other small
accessories. Make sure that all parts, which you want to sterilize, are disassembled and are placed
with the openings facing down in order to avoid their filling with water.
Note: Clean the bottles and other items before sterilizing them.
4.Place the transparent cover and plug the supply cord.
5.Press the Mode button. The indicating light will turn on. Press again the Mode button and choose
standard sterilization.
6.After the sterilization ends, the sterilizer will turn off automatically, and 5 times will beep a warning
sound for the ending of the process.
7.The sterilization will continue for about 10 minutes.
C. Drying Mode – Figure 5:
1.Assemble the sterilizer and place inside the bottles you will need to sterilize.
2.Place the transparent cover and plug the supply cord.
3.Press the "Mode" button. The indicating light will turn on. Press again the Mode button 2 times and
choose Drying function.
4.The default time for execution for this process is 60 minutes. If you want to set a shorter time for
drying, then press the Time button. The time options are 40, 50 and 60 minutes.
5.The mode will start working, when the Drying icon is activated on the display.
6.You can switch to this working mode, if you have initially chosen the standard sterilization function.
GUIDELINES FOR MAINTANCE AND CLEANING OF THE BOTTLE WARMER
 ATTENTION! If you do not clean the basis of the sterilizer from scale deposition every week, as
described, the product will not be able to work!
 IMPORTANT! Clean the filter in the base of the appliance at least once a week to avoid negative
influence on the drying efficiency.
A. CLEANING:
 Note: Do not use abrasive or aggressive cleaners (e.g. bleach) or sponge with abrasive surface for
cleaning this device.
 Never immerse the base, the supply cord or the plug in water or any kind of fluid.
 Warning! Do not wash the sterilizer in dishwasher. The tray, the sterilizer's body and the lid can be
washed with warm water and soft liquid detergent.
1.Before cleaning the product, turn off the power button, unplug the electric supply cord form the power
outlet and leave the device to cool down.
2.Do not immerse the base in water. Wipe it with a clean cloth.
3.Remove the lid, the tray and the sterilizer body and wipe the product inside and outside only with a
damp cloth.
4.Do not use strong detergents for cleaning the unit – bleach, alcohol based ones (wet antibacterial
wipes) or such with abrasive parts.
5.We recommend you to use pre-boiled or filtered water in the device in order to reduce the risk of lime
scale deposition.
6.Note: After cleaning the product, store it in a clean, dry place away from the reach of children.
7.Note: Be careful and do not allow the acces of water or other liquids to the air outlets, when you are
cleaning the heating body. Do not scratch the surface of the heating plate with metal or abrasive
objects in order to avoid damage on the plate.
13