Glacier bay 67405-1001 Guía De Uso Y Mantenimiento página 6

Installation (continued)
5
Attaching the quick connector
to the receiving block
□
Push the quick connector (1) rmly upward and
attach it to the receiving block (2). Pull down
moderately to ensure the connection has been
made.
□
After connecting the hose, Install the weight
clip (K) at the lowest point of the hose (3).
Slide the weights (L) over the clip.
L
K
3
6
Installing the soap dispenser
□
Insert the body assembly (H) through the selected
hole in the sink. Secure body assembly to sink
with the easy install nuts (I) provided. Push the
easy install nuts (I) up to the underside of the
sink and hand-turn to tighten, as shown in
the Fig 1.
□
From under the sink, screw the bottle (J) onto the
body assembly (H) shank. Insert the pump (G) down
into the body assembly (H).
2
1
Sink
Push
up
6
I
Screw
Sink
I
Fig 1
G
H
J