Changing The Blade - Bosch ART 23 LI Manual Original

Changing the Blade

Before any work on the machine itself, re-
move the battery from the machine.
To remove the worn blade 10, push it inward un-
til it snaps off of the pin 17.
Clean the pin 17 of any residual plastic/debris
with a sharp knife.
To mount a new blade 10, place the blade 10 on-
to the pin 17, push it down and pull it outward
until it engages.
Note: Only use Bosch replacement blades. They
have been developed specially for improved cut-
ting and feed performance. The use of other
blades will lead to a deterioration in perform-
ance.
Bosch Power Tools
D
English | 23
F016 L70 510 | (15.11.07)