Cleaning And Maintenance; Environmental Protection - MOLINO THL021-S Instrucciones

To connect/disconnect to Bluetooth, ensure the switch is on. Once the blue tooth
EN
is switched on it will make a sound to confirm. Access the Blue tooth settings on
your device and select the relevant code to connect or disconnect your device to
the heater.

CLEANING AND MAINTENANCE

1.
Always turn off and unplug the heater before cleaning.
2.
To clean the heater, use a damp cloth and make sure to dry excess water
once cleaned.
*ATTENTION Do not put the heater directly into any container with water in it.
TROUBLESHOOTING
1.
If the heater does not emit heat after turning on, please check the power
cord whether plugged into electric socket properly.
In first use, it is normal if the heater appears small amount of smoke and
2.
some smell because of protective-oil evaporation.
3.
After a long time using, it is normal if found some black/brown tiny thing on
heater surface. It is soft flocks.

ENVIRONMENTAL PROTECTION

Do not dispose of electrical appliances as unsorted municipal waste, use
separate collection facilities. Contact your local government for information
regarding the collection systems available. If electrical appliances are disposed
of in landfills or dumps, hazardous substances can leak into the groundwater
and get into the food chain, damaging your health and well-being. When
replacing old appliances with new once, the retailer is legally obligated to take
back your old appliance for disposal at least for free of charge.
6 |
2020-05-13 OCG Molino Terrace Heater Manual V04.indd 6 2020-05-13 OCG Molino Terrace Heater Manual V04.indd 6 27-05-20 11:34 27-05-20 11:34