Driver Installation - Topcom II 128 Guía Rápida De Usuario

Pocket MP3 player II 128 - Quick User Guide
1 INTRODUCTION
Your Pocket MP3 player II 128 combines a digital audio player, USB Flash memory drive, SD/MMC card reader and Digital Voice Recorder.
This quick user guide is a summary of the operation instructions. The full user guide is stored on the enclosed CD-rom in PDF format.
After you finish using the player, put the manual away in a safe place for further reference.

2 DRIVER INSTALLATION

It is important that you first install the driver before connecting the player to your USB port.
2.1 AUTO RUN
1. Insert the enclosed CD into the CD-ROM
2. A wizard will guide you through the software installation.
Note: For installation in Windows 2000, Q283187 Hot fix or Service Pack 3 needs to be installed.
2.2 FOR WINDOWS 98 USER:
After the software installation, another wizard will guide you through the driver installation.
If the installation is not running automatically, follow the next instructions
1. Double click 'My computer' on your desktop
2. Select the CR-ROM drive
3. Click the right button of your mouse and then select 'Open'
4. Select the 'W98DRIVER' directory and than double click the 'AFMP3DRV98.EXE' to install the driver
3 PUTTING SONGS ON TO THE PLAYER
Once the device driver is installed, remove the USB cover and connect it to your PC USB port. The player will be detected automatically and two removable
disks will be displayed in your system. One of the disks will be assigned to the internal memory, the other for the SD/MMC card reader. You can now copy
Music (MP3/WMA) files to the selected drive. Once the files are copied, disconnect the player from the USB port. Press the ON/OFF button to activate the
player.