Tabla de contenido
Publicidad
Cargue su auricular y batería de repuesto
Charge Your Headset
Charge Your Spare
Battery
Align the charging cradle pins with the base and press firmly until the cradle rests evenly on the
1
base.
2
Plug one end of power supply into power jack on back of the base and other end into working
power outlet.
3
Place the headset in the charge cradle. The headset and battery charging LEDs flash green when
charging the headset and battery. The charging LEDs turn solid green, independently of each
other, when the respective headset or battery is fully charged. Charge for at least 20 minutes
prior to the first use. A full charge takes 3 hours.
Headset charging LED
1
2
Spare battery charging LED
NOTA
Este producto tiene una batería reemplazable. Utilice únicamente el tipo de batería
suministrado por Plantronics.
The spare headset battery is shipped in the battery compartment on the side of the charging
cradle.
The spare battery charges when the power supply is plugged into a working power outlet and
the charging cradle is connected to the base; the battery charging LED flashes green when
charging the spare battery and turns solid green when the spare battery is fully charged.
NOTA
The headset does not need to be docked for the spare battery to charge; the spare battery
charges regardless of the headset status.
To replace your headset battery, see
Replace your headset
battery.
12
Publicidad
Tabla de contenido
