Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
INSTALLATION INSTRUCTIONS FOR PART GMOS-13
Cadillac STS amplified OnStar
interface 2005-2011
KIT FEATURES
• Provides accessory (12-volt 10-amp)
• Retains R.A.P. (Retained Accessory Power)
• Used in amplified systems
• Retains chimes
• Provides NAV outputs (parking brake, reverse, mute, and V.S.S.)
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• Retains OnStar/OE Bluetooth
• Adjustable volume for chimes and OnStar
• High level speaker input
• USB updatable
• Retains balance and fade
METRA. The World's best kits.
GMOS-13
APPLICATIONS
See inside front cover
™
1-800-221-0932
INTERFACE COMPONENTS
• GMOS-13 interface • 16-pin Axxess harness
with stripped leads • 18-pin Axxess harness to
16-pin GM harness with stripped leads • 16-pin
GM harness with stripped lead
TOOLS REQUIRED
• Cutting tool • Crimping tool • Tape • Connectors
(example: butt-connectors, bell caps, etc.)
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
Publicidad
Tabla de contenido
Manuales relacionados para Axxess GMOS-13
Resumen de contenidos para Axxess GMOS-13
- Página 1 INSTALLATION INSTRUCTIONS FOR PART GMOS-13 GMOS-13 INTERFACE COMPONENTS • GMOS-13 interface • 16-pin Axxess harness Cadillac STS amplified OnStar with stripped leads • 18-pin Axxess harness to 16-pin GM harness with stripped leads • 16-pin interface 2005-2011 GM harness with stripped lead APPLICATIONS TOOLS REQUIRED See inside front cover • Cutting tool • Crimping tool • Tape • Connectors (example: butt-connectors, bell caps, etc.) KIT FEATURES • Provides accessory (12-volt 10-amp) • Retains R.A.P. (Retained Accessory Power) • Used in amplified systems • Retains chimes • Provides NAV outputs (parking brake, reverse, mute, and V.S.S.) • Prewired ASWC-1 harness included (ASWC-1 sold separately)
-
Página 2: Connections To Be Made
• Connect the Green wire to the radio’s left rear positive speaker output. CADILLAC STS 2005-2011 • Connect the Green/Black wire to the radio’s left rear negative speaker output. • Connect the Purple wire to the radio’s right rear positive speaker output. • Connect the Purple/Black wire to the radio’s right rear negative speaker output. Connections to be made • Connect the Blue/White wire to the radio’s amp turn on wire (this wire must be connected to hear sound from the factory amplifier). From the 16-pin Axxess harness: • Connect the Brown wire to the mute wire of the aftermarket radio. If the aftermarket radio does not have a Mute wire, tape up the Brown wire (note, if • Connect the Red wires to the ignition wire of the aftermarket radio. the mute wire is not connected, the radio will turn off when OnStar is active). • Connect the Orange/White wire to the illumination wire of the aftermarket • Connect the Light Green wire to the parking brake wire of the aftermarket radio. If the aftermarket radio has no illumination wire just tape off the Orange/White wire. navigation radio, if applicable. • Connect the White wire to the left front positive speaker output of the • Connect the Blue/Pink wire to the V.S.S. or speed sense wire of the aftermarket... - Página 3 GMOS-13 Connections to be made Testing the GMOS-13 From the 18-pin Axxess harness to 16-pin GM harness: • Turn the ignition “on”. Then turn the aftermarket radio “on”. • Connect the Yellow wire to the radio’s 12-volt battery or memory wire. • Press the OnStar button, the radio should turn “off” (radio will mute if mute wire is connected) and you should hear OnStar. • Connect the Black wire to the radio’s ground wire. • Push the OnStar cancel button and the radio should come back “on”. • Plug the 18-pin Axxess harness into the GMOS-13. • The Black/Yellow wire is for the OnStar volume adjustment. This will be discussed in the OnStar Level Adjustment section of this instruction. OnStar Level Adjustment From the 16-pin GM harness: • To adjust the OnStar volume level find the Black/Yellow wire on the...
-
Página 4: Chime Volume Adjustment
INSTALLATION INSTRUCTIONS FOR PART GMOS-13 IMPORTANT WARNING Chime Volume Adjustment This product includes instructions for installation which must be carefully followed. The instructions are 1) With car on, shut off car and leave keys in ignition. Open the car door and leave it open. Chimes worded in such a manner to assume that the installer will be heard. is capable of completing these type of electronic installations. If you are unclear as to what you are 2) Wait 10 seconds, then with a small screwdriver adjust the potentiometer fully counterclockwise (all instructed to do or believe that you do not understand the-way left), then clockwise to raise chime level and counterclockwise to lower the chime level. the instructions so as to properly and safely complete the installation you should consult a technician who 3) When the volume is at the desired level, remove the keys from the ignition. This will lock the chime does have this knowledge and understanding. volume at its current level. Failure to follow these instructions carefully and... -
Página 5: Componentes De La Interfase
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA GMOS-13 GMOS-13 COmPOnEnTES DE LA InTERfASE • Interfase GMOS-13 • Arnés Axxess de 16 pins Interfase OnStar amplificada para con conectores pelados • Arnés Axxess de 18 pins a arnés GM de 16 pins con conectores pelados Cadillac STS 2005-2011 •... -
Página 6: Aplicaciones
• Conecte el cable verde/púrpura al cable de reversa del radio con navegación de • Conecte el cable gris con la salida positiva de la bocina frontal derecha del mercado secundario, si corresponde. radio de mercado secundario. • Conecte el arnés Axxess de 16 pins en el GMOS-13. -
Página 7: Prueba Del Gmos
Conexiones que se deben hacer Prueba del GMOS-13 Del arnés Axxess de 18 pins al arnés GM de 16 pins: • Encienda la marcha. Luego encienda el radio de mercado secundario. • Conecte el cable amarillo a la batería de 12 voltios o el cable de memoria del radio. -
Página 8: Ajuste Del Volumen De Los Tonos
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA GMOS-13 ADVERTENCIA IMPORTANTE Ajuste del volumen de los tonos Este producto incluye instrucciones de instalación que deben seguirse cuidadosamente. Dichas instrucciones están 1) Con el vehículo encendido, apague el auto y deje las llaves en la ignición. Abra la puerta del carro redactadas dando por supuesto que el instalador es capaz y déjela abierta.