Water2Buy W2B180 Manual Del Usuario página 6

6
Add the plumbing fittings
(meter models only)
Remove the red fastened clips.
Apply silicon lube to the o-rings.
Push the o-rings into the bypass
assembly. Put back on the red
fasteners.
Meter Units have 5 red fasteners,
timer units have 3 red fasteners
which must be securely in place.
Open the bypass valves
(meter models only)
Check both bypass valves are
open.
Use the tool supplied to turn the
red bypass valves fully clockwise.
The valves are open when both
are parallel.
NOTE: Failure to open these will
bypass the water softener leaving
you with hard water.