Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2. HDD INSTALLATION
1. Remove the rear cover of the unit by removing the screws.
2. Pull the bracket toward the front.
4. Secure the drive to the base using the screws.
5. Place the base on the inside of the box by aligning
the tab with the rail.
6. Replace the rear cover using the screws to secure it.
If you have not enough knowledge about changing the HDD internal configuration, we
recommend that you ask a technician, otherwise may cause several damages in the equipment.
3. Place the disk in the bracket matching
SATA connectors and make sure that they
are securely connected.
5 5
Publicidad
Capítulos
Tabla de contenido
