– Now release the previously inserted adapter
through the quick coupling
– Now no more air bubbles are to be found in the
circuit, and the machine is ready for use
(3)
GENERAL SAFETY RULES
The rules below must be strictly followed, to
prevent damage to the operator and machine.
– Carefully read the labels on the machine; do not
cover them for any reason, and immediately
replace them in case they are damaged
– The machine must be used only by authorized,
trained personnel
– While the machine is running, take notice of other
people in general and children in particular
– Do not put any fluid containers onto the machine
– Storage temperature must range between -25 (C
and +55 (C
– Optimal working temperature must range between -
5 (C and +45 (C
– Humidity must range between 30% and 95%
– Brake fluids are toxic and aggressive. Therefore,
avoid any contact with these products; in case of
contact, immediately wash with water; the same
precaution must be taken in case of contact with
clothes and car parts
– Before each use, check the machine, the cable and
the plug. Do not use the machine if any damage is
shown, and call a trained technician out
– Do not use the machine in explosive atmospheres
– Do not use the machine as a means of transport
– Do not use any acid solutions that might damage
the machine and/or people
– Do not hit any shelves or scaffolds where objects
may fall
– The equipment will not slide with a slope of up to
0.5%
– If any running defects should be shown in the
machine, ask for the dealer's assistance or send
the equipment to the nearest assistance centre
– If any parts need to be replaced, ask an Authorized
Dealer for ORIGINAL spare parts
– Misusing any component parts of the machine will
invalidate the warranty
HOW TO USE
BRAKING SYSTEM BLEEDING
Screw the adapter onto the brake fluid tank available
in the motor vehicle, choosing the most suitable one
from those in the kit.
Connect the delivery pipe to the adapter that has
been fitted onto the tank.