Hubbell CFBS1R8CVR Guia De Inicio Rapido

CFBS1R8CVR 8 INCH ROUND FLOOR BOX COVER Installation
CAUTION: NOT FOR USE WITH FIRE RATED POKE-THROUGHS. Use S1R8CVRxx covers for fire rated poke-through
applications.
CAUTION: RISK OF ELECTRICAL SHOCK. Disconnect power before installing or servicing.
NOTICE: For installation by a qualified electrician in accordance with all national and local electrical codes,
communications standards, the following instructions and any instructions included with individual devices.
Use with RAFB4BASE, CFB4G25R, CFB4G25RCR, CFB4G30R, CFB4G30RCI, CFB4G30RCR, CFB6G30R, CFB6G30RCR,
CFB10G55R, or CFB10G55RCR floor boxes.
Also compatible with CFB4G25, CFB4G25CR, CFB4G30, CFB4G30CR , and CFB4G30CI floor boxes when used with the
CFB4GS1R8ADAPT adapter.
Also compatible with CFB6G30, and CFB6G30CR floor boxes when used with the CFB6GS1R8ADAPT adapter.
Also compatible with CFB10G55, and CFB10G55CR floor boxes when used with the CFB10GS1R8ADAPT adapter.
Also compatible with LCFBSSA, and LCFBCA floor boxes when used with the LCFBS1R8ADAPT adapter.
1. Install floor box and flooring in accordance with the instructions provided with the floor box.
2. Use the provided floor gasket [1] or apply a 1/4 inch [6.3 mm] thick continuous bead of electrical grade type RTV
silicone sealant around the perimeter on the underside of the cover flange [2].
3. Attach flange to the floor box using #8-32 flat head screws [3] provided with the cover, see FIGURE A. Tighten
mounting screws [3] to 10 - 15 lbs-in torque [1.1 - 1.7 N m].
Wiring Device - Kellems
Hubbell Incorporated (Delaware)
Shelton, CT 06484
1-800-288-6000
www.hubbell-wiring.com
PD-2600
8/14
Instructions
FIGURE A
ENGLISH
3
2
1