ResMed Power Station II Manual Del Usuario página 14

Ocultar thumbs Ver también para Power Station II:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 49
Monitor the charge level of the RPS II. When the charge level is low, ensure
that continuity of power can be maintained.
When in use, always plug the cable from the RPS II into the device. Keep the
RPS II power switch turned on to ensure it can provide backup power.
When transporting, turn off the RPS II, unplug all cables, and pack in the carry
bag.
Medical electrical equipment requires special precautions regarding EMC and
needs to be installed and operated according to the information provided in
this user guide. Portable and mobile communications equipment can affect
medical electrical equipment. If EMC interference is observed, for example
static on radios, move the RPS II away from other equipment.
Notes:
The above are general warnings and cautions. Specific warnings, cautions, and
notes appear with the relevant instructions in the guide.
For any serious incidents that occur in relation to this product, these should be
reported to ResMed and the competent authority in your country.
Limited warranty
ResMed Pty Ltd (hereafter 'ResMed') warrants that your ResMed product shall be free
from defects in material and workmanship from the date of purchase for the period
specified below.
Product
• Mask systems (including mask frame, cushion, headgear and
tubing)—excluding single-use devices
• Accessories—excluding single-use devices
• Flex-type finger pulse sensors
• Humidifier water tubs
• Batteries for use in ResMed internal and external battery systems
• Clip-type finger pulse sensors
• CPAP and bilevel device data modules
• Oximeters and CPAP and bilevel device oximeter adapters
• Humidifiers and humidifier cleanable water tubs
• Titration control devices
• CPAP , bilevel and ventilation devices (including external power
supply units)
• Battery accessories
• Portable diagnostic/screening devices
This warranty is only available to the initial consumer. It is not transferable.
If the product fails under conditions of normal use, ResMed will repair or replace, at its
option, the defective product or any of its components.
This limited warranty does not cover: a) any damage caused as a result of improper
use, abuse, modification or alteration of the product; b) repairs carried out by any
Warranty period
90 days
6 months
1 year
2 years
English 9

Publicidad

Tabla de contenido
loading

Tabla de contenido