Publicidad
Idiomas disponibles
Idiomas disponibles
English
1.
Measuring cup
2. Lid
3. Jar
4. Sealing ring
5. Blade
6. Blade base
7.
Control panel
8. Control buttons
9. Speed switch
10. Blender base
10
INSTRUCTIONS
Use the device only for the purpose intended. Any other
use may result in damage to the device or injuries.
IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
1.
Read this manual before first use thoroughly. It
contains important information for your safety as well
as for the use and maintenance of the equipment. Keep
these instructions for future reference and pass it on
with the device.
2. Pay particular attention to the warnings on the device
and in this instruction manual.
3. Use the device only for its intended purpose. Improper
use may lead to hazards.
4. This device is designed for household use only, not for
staff kitchen areas in shops, offices and other working
environments, farm houses, by clients in hotels, motels
and other residential type environments, bed and
breakfast type environments use. It is not suitable for
commercial use.
5. In the event of improper use or wrong operation, we do
not accept any liability for resulting damages.
6. The use of accessories and components not expressly
recommended by the manufacturer may result in
injuries or damages and voids the warranty.
7.
This device is not intended to be used by persons
(including children) with reduced physical, sensory
or mental abilities or lack of experience and / or
lack of knowledge unless they are supervised by a
person responsible for their safety or have received
instructions on how to use the device.
8. Children should be supervised to ensure that they do
not play with the device.
9. Never leave the device unsupervised while it is
switched on.
10. Do not place heavy objects on top of the device.
11. Never immerse electrical parts of the device in water
during cleaning or operation. Never hold the device
under running water.
Power supply
1.
The mains voltage must match the information on the
rating label of the device.
2. The power plug is used as the disconnect device.
Please be sure that the power plug is in operable
condition.
3. Only removing the power plug can separate the device
completely from the mains supply.
4. Avoid damages to the power cord that may be caused
by kinks or contact with sharp corners.
5. Make sure, the device, including power cord and power
plug are not exposed to hot surfaces.
6. Only unplug from the power outlet by the plug itself.
Do not pull on the cord.
7.
Disconnect the power plug when the device is not
in use, in case of malfunctions, prior to attaching
accessories and prior to each cleaning.
8. If the power cord or the casing of the device is
WKBE80_Blender_EnSp_IM.indd 2
1
damaged or if the device is dropped, the device may
not be used before it is examined by a professional
electrician.
9. A damaged power cord may only be replaced by the
manufacturer or a workshop commissioned by the
manufacturer or by a similarly qualified person in
order to avoid hazards.
Installation location
1.
Place the device on a flat, sturdy and heat-resistant
surface.
2. Put the device in a place which is out of reach of
children.
3. Do not operate this device near flammable materials
(e.g. curtains, textiles, walls) and never cover it. Ensure
that there is always a sufficient safe distance from
flammable materials.
4. Use this device in dry indoor areas only and never
outdoors.
5. WARNING: Do not use this device near water or
heavy moisture; e.g. in a damp basement or beside a
swimming pool or bathtub.
6. In order to reduce the risk of fire and electric shock,
do not expose the device to fire (fireplace, grill,
candles, cigarettes and so on) or water (water drops,
water splashes, vases, tubs, ponds and so on).
7. Keep this device away from all heat sources like for
example, ovens, hot plates and other heat-producing
devices/objects.
8. Protect this device from extreme heat (over 35 °C)
and cold (under 5 °C) as well as from direct sunlight
and dust.
SPECIFIC SAFETY INSTRUCTIONS
1.
Remove accessories from the device once the motor
has come to a complete stop and the plug has been
pulled.
2. Do not operate the device when it is empty in order to
prevent damages.
3. CAUTION: Do not touch any moving parts while the
device is still in operation.
4. CAUTION: Be careful when handling the blade unit. It
has sharp edges.
5. Clean the device and other accessories after each use.
Refer to the Chapter CARE AND MAINTENANCE.
6. Keep hands and utensils out of container while
blending to reduce the risk of severe personal injury
and/or damage to blender.
7. Do not use a broken, chipped or cracked blender jar.
8. Always operate blender with cover in place.
9. Always begin processing at the lowest speed setting.
10. Do not use the appliance for more than 3 minutes
continuously.
BEFORE USING FOR THE FIRST TIME
1.
Carefully take the device and its accessories out of
the packaging. Check the packaging contents for
completeness and damages. Should the contents
in the packaging not be complete or be damaged,
do not use the device. Return it to your retail outlet
immediately.
2. Clean the device and all accessories before the first
use. Refer to the chapter CARE AND MAINTENANCE.
USING THE BLENDER
Assembling
2
1.
Turn jar upside down so the small opening is at the
top. Place sealing ring over jar opening.
2. Place blade into jar.
3. Put the blade base into the jar opening and turn
towards right to be adjusted.
4. Put the assembled jar into the base.
Speed selection
1.
Slide Speed Switch to the position (High) or
(Low).
2. Choose the speed you wish to blend the ingredients
until you get the consistency you need.
3. IMPORTANT: Do not operate your blender for more
than 3 minutes continuously. Press "0" to stop the
blender and to turn it off.
Ice crush function "
"
To use this function, select position high of the
1.
control. Press ice crush bottom "
" 8 speed and hold
it for desired time. Press "0" to stop the blender and
wait till the blade stopped.
2. Repeat the cycle as you wish.
SUGGESTION FOR THE BLENDER
•
Always put the jar lid while the appliance is working.
•
In order to get better results, do not blend more than
500 mL simultaneously.
•
Use a spatula to remove ingredients stucked on the jar,
but before that the appliance should be tuern off first.
•
Cut the meat or others solid foods in small pieces
before you pour them into the jar.
•
In order to get a better results with solid ingredients,
put small amount of ingredients by several time,
instead of big amount at once.
•
Put ice cube one by one.
•
If the blending result is not effective and fast, stop the
machine and mix the ingredients with a spatula.
CARE AND MAINTENANCE
CAUTION: Never immerse the blender body in water or
any other liquid.
1.
Use a damp, soft sponge with mild detergent to clean
the outside of the blender base.
2. Remove the jar, sealing ring and blade base after each
use, clean then with soapy water and rinse with clean
water. Do not put the jar into the dishwasher.
3. After cleaning, reassemble blade to jar with sealing
ring and jar bottom. Store blender with cover ajar to
prevent container odor.
DISPOSAL
Proper disposal of this product.
This label indicates that, in the EU, electronic devices
cannot be disposed of with regular household waste.
Please use the return or collections systems of your
municipality or contact the seller where you purchased this
product.
INFORMATION AND SERVICE
If you have question or concerns about your product,
please visit our website:
www.westinghouse-starglory.com, or contact our oversea
offices/agents.
In line with our policy of continuous product development,
we reserve the right to change product, packaging and
documentation specifications without notice.
3
Español
1.
Copa de
alimentación
2. Tapa
3. Vaso de licuadora
4. Aro de sellado
5. Cuchilla picahielo
6. Disco de fondo
roscado
7.
Panel de
controles
8. Botones de
control
9. Control para
velocidad
10
10. Base de licuadora
INSTRUCCIONES
Use este dispositivo solo para los fines previstos. Cualquier
otro uso puede resultar en daños en el aparato o lesiones.
MEDIDAS IMPORTANTES DE SEGURIDAD
Siga las precauciones de seguridad básicas, entre ellas:
1.
Lea atentamente este manual antes de el dispositivo
por primera vez. Contiene información importante para
su seguridad, así como para el uso y mantenimiento
del equipo. Guarde estas instrucciones para futura
referencia y transmítalas con el dispositivo.
2.
Preste especial atención a las advertencias presentes en
el dispositivo y en este manual de instrucciones.
3.
Utilice el dispositivo sólo para los fines previstos. El uso
inadecuado puede dar lugar a riesgos.
4. Este dispositivo está diseñado solamente para uso
doméstico, no para tiendas, oficinas y otros ambientes
de trabajo. Tampoco, por parte de los clientes de
hoteles, moteles y otros entornos de tipo residencial o
de alojamiento. No es adecuado para uso comercial.
5.
En caso de uso incorrecto o mal funcionamiento, no
aceptamos ninguna responsabilidad por los daños
resultantes.
6. El uso de accesorios y componentes que no estén
expresamente recomendados por el fabricante puede
ocasionar lesiones o daños y anula la garantía.
7.
Este dispositivo no está diseñado para ser utilizado
por personas (incluidos niños) con discapacidades
físicas, sensoriales o mentales o falta de experiencia y/o
conocimiento, a menos que estén supervisados por una
persona responsable de su seguridad o hayan recibido
instrucciones sobre cómo utilizar el dispositivo.
8. Es necesario supervisar a los niños para asegurarse de
que no jueguen con el dispositivo.
9. No deje el aparato sin vigilancia mientras está
encendido.
10. No coloque objetos pesados sobre el aparato.
11. No sumerja las piezas eléctricas del dispositivo en
agua durante la limpieza o funcionamiento. No sujete el
dispositivo bajo agua corriente.
Fuente de alimentación
1.
La tensión de red debe coincidir con la información en
la etiqueta del aparato.
2.
El enchufe de alimentación se utiliza como dispositivo
de desconexión. Asegúrese de que el enchufe esté en
buenas condiciones de funcionamiento.
3.
El aparato sólo debe desconectarse de la red eléctrica
extrayendo el enchufe.
4. Evite daños al cable de alimentación que pueden ser
causados por torceduras o el contacto con bordes
afilados.
5.
Asegúrese de que el dispositivo, incluyendo el cable de
alimentación y el enchufe, no se exponga a superficies
calientes.
6. Utilice sólo el enchufe para desenchufar el aparato de la
toma de corriente. No tire del cable.
7.
Desconecte el enchufe cuando el dispositivo no esté
en uso, en caso de mal funcionamiento, antes de la
colocación de accesorios y antes de cada limpieza.
5/4/2017 12:48:07 PM
4
Publicidad
