Activating The Scenarios - KSenia KSI2100021.312 Manual Usuario

SCROLL / ARROW KEYS
Actually, "Scroll" is not a key but the zone delimited by a circle (on the
right side of ergo S) (keys for ergo M) characterized by a little depression.
The action on this zone clockwise (to move forward) or anticlockwise (to
EN
move backwards) permits to:
• scroll forwards or backwards the menu entries;
• choose the configuration data to enter (which will only be the suitable
ones for the changing data) such as: character, numbers, preset values,
etc. (#).
KEY #
Displaying of partitions status then use the scroll or the arrows to navigate
the menu.
KEY *
Displaying of zones status then use the scroll or the arrows to navigate the
menu.
KEYS 0-9
If configured and enabled by the installer, you can enter PIN code (default:
000001) and then press a scenario number for 3 seconds to activate it.

ACTIVATING THE SCENARIOS

• When the user enters the 6 digits PIN code (default 000001), the display
will show the pre-programmed scenarios (starting from the most used)
and the Main Menu access. Let's assume, for example, that two scenarios
are enabled on the keypad, assigned to key 0 ("Disarm") and to key 1
("Arm") respectively; the keypad display shows the scenario to be
applied, or the most frequently used. If you don't press any key within 3
seconds, the scenario shown on the display will be performed
automatically and then the keypad will return to the stand-by mode.
• When the user enters the 6 digits PIN code (default 000001), pressing the
number key corresponding to a scenario, will activate it. Otherwise press
the # key to enter the Main Menu directly.
20