KSenia KSI2100021.312 Manual Usuario página 23

User management
WLS alarm led
Submenu is the following:
- Description: change the name of the user selected, use
the keypad (see above the Keys - Characters match
table).
- Manage codes
-Enable code: enable/disable the code of the user
selected
-Change PIN: change PIN of the user selected
- Enable tags: enable/disable the key of the user selected
- Remote control: enable/disable the remote control of
the user selected.
This menu allows to enable the signalisation LED present
on wireless devices. If enabled, the LED turns on any time
the detector is violated.
By this way, the user can check the detectors status in
any moment. This optical signalisation is automatically
disabled after 10 min.
23
EN