Kohler K-24916-NA Guía De Instalación Y Cuidado página 7

3. Prepare the Speaker Mounts
IMPORTANT! Risk of product damage. Remove the speaker
mount by hand. Do not use tools to remove the mount from the
speaker, doing so may damage the product.
Remove the speaker mount from each speaker.
Assemble the adhesive applicator.
NOTE: For ease of installation the adhesive kit can be used with a
standard caulking gun. Using the clear sleeve (provided), the
adhesive kit will fit into a standard caulking gun.
Apply a continuous bead of adhesive to the non-threaded side of
the speaker mount.
Press and hold the mount at the marked location on the bath for
5 minutes.
Repeat for the other speaker.
Allow the adhesive to cure for each speaker for another 5 minutes
before continuing to the next steps.
Kohler Co. 7 1280068-2-A