Complete The Installation - Kohler K-24916-NA Guía De Instalación Y Cuidado

4. Install the Speakers
IMPORTANT! Risk of product damage. Install the speaker by
hand. Do not use tools to install the speaker into the speaker mount,
doing so may damage the product.
Install the speakers onto the speaker mounts. Tighten by hand
until snug.
NOTE: For ease of installation, label the wires for each speaker to
note the left (L) and right (R) speaker. This will help with the
amplifier installation.
The positive (+) wire is white.
The negative (-) wire is white with a black stripe.
Refer to the installation guide packed with the amplifier for
wiring and installation details.

5. Complete the Installation

IMPORTANT! Turn off the power supply to the amplifier before
performing any sound adjustment.
Before moving the bath into final installation location. Test the
music system.
If the speaker sound needs adjustment, remove the speaker wires
from the terminal connectors.
Switch the right (R) and left (L) wires.
1280068-2-A
Negative
(White with Black Stripe)
8
Positive
(White)
Kohler Co.