‒
AC charging
Connect the AC adaptor to the input socket of the solar
panel (IN). Next, plug the AC adaptor into any standard AC
wall outlet to begin charging.
Do not use any other AC adaptor than the one provided
with the solar panel to charge the built-in battery.
•
Installation
Adjust the angle of the bracket so that the solar panel is
directly facing the sun. Generally in the northern
hemisphere, this means the panel is facing south. For a
maximized performance, ensure the solar panel is facing
south, in an un-shaded position and ideally tilted at a 45
degree angle. This will prevent the need to change its
orientation every season and ensure its continued
efficiency. However, please note that the ideal orientation
depends on the specific situation of the set-up site.
Do not install the solar panel in a location where the sunlight
may be blocked from getting to the panel.
•
Cautions for use
− This device can be used by children aged 8+ and also
disabled people, sensory or mentally handicapped
people or people without knowledge or experience
Guide panneau solaire 12 V – Ind. A – Octobre 2020
19/60