Emist Truelectrostática EX-7000 Manual Del Usuario página 5

PLASTIC PARTS CLEANING SOLVENT HAZARD
Many solvents can degrade plastic parts and cause them to fail,
which can lead to serious injury or property damage. In order to help
prevent against degradation:
FIRE, EXPLOSION AND ELECTRIC SHOCK HAZARD
Flammable fumes, such as solvent and paint fumes, in a work area can
ignite or explode. To help prevent fire, explosion and electric shock:
©2021 EMist® is a registered trademark of SanoTech 360, LLC. All rights reserved.
WARNINGS
• Use only water-based solvents to clean
equipment or parts.
WARNINGS
• Electrostatic equipment must be used only by
trained, qualified personnel who understand the
requirements of this manual.
• Stop operation immediately if static sparking
occurs or you feel a shock. Do not use
equipment until you identify and correct the
problem.
• Use and clean equipment only in well
ventilated area.
• Never spray a flammable chemical
(with a flashpoint less than 60˚C).
• Do not turn lights on or off when flammable
fumes are present.
• Keep spray area free of debris, including
solvents, rags, gasoline or any flammable
chemicals.
• Keep a working fire extinguisher in the work
area.
• CAUTION, TO AVOID ELECTRICAL
SHOCK, DO NOT TOUCH OR INSERT
ANYTHING IN THE NOZZLE OF THE
SPRAYER
EMI-018-21 - EX-7000 - 041921
EN
GENERAL GENERAL
PRECAUTIONS & PRECAUTIONS &
SAFETY WARNINGS SAFETY WARNINGS
INITIAL
INSPECTION &
SET UP
ASSEMBLY &
OPERATION
INSTRUCTIONS
SPRAY
APPLICATION
MAINTENANCE
& CLEANING
TROUBLESHOOTING,
SUPPORT
& REPAIR
5