Safety Information - Sam HC25 Guia De Inicio Rapido

IMPORTANT RECEIVING INSTRUCTIONS
SAFETY
INFORMATION
Visually inspect all components for shipping damage. If any shipping damage is found,
notify carrier at once. Shipping damage is
responsible for all repair or replacement costs resulting from damage in shipment.
To avoid personal injury or property damage during system operation, read and follow
all ,
CAUTIONS WARNINGS
SAM CANNOT BE HELD RESPONSIBLE FOR DAMAGE OR INJURY RESULTING FROM UNSAFE
USE OF PRODUCT, LACK OF MAINTENANCE, OR INCORRECT PRODUCT AND SYSTEM
. Contact SAM when in doubt as to applications and safety precautions.
APPLICATION
WARNING
To avoid personal injury, always wear proper personal protective gear
when operating hydraulic equipment (i.e. safety glasses, gloves, etc.).
WARNING
The system operating pressure must not exceed the maximum
pressure rating of the lowest rated component in the system.
WARNING
Never overload the cylinder. Lifting a load that exceeds the capacity of
the cylinder may cause equipment failure and personal injury.
WARNING
Make sure that all system components are protected from external
sources of damage, such as flame, moving machine parts, sharp
objects, corrosive chemicals. DO NOT expose hydraulic equipment to
temperatures above 150°F (65°C).
WARNING
Keep hands clear of the load, away from the jaws of the spreader.
CAUTION
DO NOT use the hydraulic hose to carry a hydraulic component
because damage to the hose or the component may occur.
CAUTION
Use less than the maximum rated stroke. Operating the cylinder
beyond the limits of its rated stroke can damage the cylinder.
covered by warranty. The carrier is
NOT
, and included with or attached to each product.
INSTRUCTIONS
2