STEP 6
Insert cam locks (2) into the back panel (F) .
Secure the top panel (A) and bottom panel (N) by rotating the cam locks (2) on back panel (F)
1/2 turn clockwise using a Phillips head screwdriver (not included).
Attach the hinges on the door (G) to the pre-drilled holes on the right side panel (C) with screws (11)
as shown. Use a Phillips head screwdriver (not included) to tighten the screws.
Adjust the hinges, if required.
CONSOLE
DL8417-3
F
2
11
2
Adjust up and down
11
G
6 PCS
6 PCS