Spot Cleaning Carpet & Upholstery; Suction Channel - Bissell PET STAIN ERASER 2842 Serie Manual Del Usuario

Spot Cleaning Carpet & Upholstery
For additional tips and tricks on using your machine visit support.BISSELL.com.
1.
Flip the Formula Tank Cap
up to open. Add formula to the
formula dot. No need to add
water! Click the Formula Tank
Cap into place and make sure
it's secure.
Note: If desired, add 1/2 ounce
of BISSELL BOOST Formula to
2X Pet Stain & Odor formula.
4.
Scrub the area with the
Rotating PowerBrush, keeping
the nose of the machine flat on
the ground, as shown.
Note: The Pet Tool is an easy to clean brush for pet messes. See page 7 for steps
on switching the tool.
WARNING
IMPORTANT: Check the manufacturer's tag before cleaning upholstery. "W" or "WS" on the tag means you can use your Pet Stain
Eraser™. If tag is coded with an "S" (with diagonal strike-through), or says "Dry Clean Only," do not proceed. If manufacturer's tag
is missing or not coded, check with your furniture dealer.
Power
2.
Turn machine ON by
pressing the Power Button.
Note: The rotating brush
automatically turns on when
powering machine ON. Press
the Brush Button to turn off.
Suction
Channel
5.
For maximum suction, tilt
the machine forward and firmly
press the Suction Channel
down on the cleaning surface.
Keep spray away from face. Failure to do so may result in personal injury.
Spray Spray
Brush
3.
To remove the spot or stain,
first tilt the machine down so
the Spray Tip is pointing at the
area. Press the Spray Button to
dispense formula.
6.
Make sure to check the Dirty
Water Tank for when it reaches
the "MAX FULL" line. See next
page on how to empty.
BISSELL.com 5