Device Overview And Function Keys - auna PRO UHF200C Manual De Instrucciones

EN
18

DEVICE OVERVIEW AND FUNCTION KEYS

Screen: Displays information from the receiver and transmitter.
1
On/Off: Switch receiver on/off
2
IR Generator: Infrared Signal Generator
3
Down: Set a channel. Press and hold to activate the IR function.
4
Up: Set channel
5
Volume control: Turn to adjust the volume of the receiver output.
6
Antenna: Signal amplification for the receiver.
7
XLR output connector: Connect one end of an XLR audio cable to
this connector and plug the other end of the cable into the input of
8
your mixer.