Horizon Global 76225 Instrucciones De Instalación página 4

1. Remove the Fascia
a.) Using a drill and a 5/32" drill bit, remove the (3) rivets located inside the wheel well on each side of the vehicle, and the (4) rivets located inside the trunk
opening. Note: a 5/32" allen bit may be useful to remove the rubber trunk stopper to allow access to the rivets located near the brake lights.
b.) Using an 7mm socket, remove (1) screw from the top side of the wheel well on each side of the vehicle.
c.) Using a flat blade screw driver, remove the (4) push pins located underneath the trunk opening, at the top of the fascia.
d.) Remove the fascia
D
©2017 Horizon Global Americas Inc. - Printed in Mexico Sheet 4 of 18 76225NP 11-7-17 Rev. A