LevelOne Printer Server Serie Guía De Instalación Rápida página 7

6. Specify the program folder where the program icons will be added to, click "Next"
(Figure 1-5)
7. The system will start to install the utilities automatically (Figure 1-6)
8. You have completed the installation phase and prepare to configure the Printer Server.
The "Choose Printer Server" will list all Printer Servers within the network. Select the
Printer Server you would like to configure and click "Next" (Figure 1-7)
NOTE 1: If this is the first time you configure the Printer Server, the "Printer Server Name" is
the last 6-digit of MAC ID with prefix "PS". Please check the MAC ID on the printer
server.
NOTE 2: The list can only display the devices from the same manufacturer.
9. Specify a recognizable name for the Printer Server and click "Next" (Figure 1-8)
10. Specify the IP Address for the Printer Server manually or click "Next" to keep default IP
Address, i.e. 192.168.2.2. (Figure 1-9)
11. The configuration summary is displayed in the window. Now, you have completed the
"Printer Server Setup". Click "Finish" and your system will add network port of the Printer
Server to your PC automatically. (Figure 1-10)
12. The Administrator Installation procedure is totally completed. Click "Finish" (Figure 1-11)