Product Specifications - BLACK&DECKER LAM95 Manual De Instrucciones

Unit powers down
on its own
Document jammed
inside laminator

PRODUCT SPECIFICATIONS

Model
Dimensions
Weight
Cord Length
Voltage
Power
Pouch Thickness Capacity
Maximum Pouch Width
Estimated Warm-Up Time
Laminating Speed
• Automatic
shut-off activated
• Misfed document
(not centered or
straight when fed
through in-feed slot
or not fed with the
sealed edge first)
• Empty pouch
• Pouch was not used
• Glue residue on
rollers
• Self-adhesive
laminating sheets
used
LAM95
3.25 x 15.75 x 6.00
3.56 lbs.
5 Ft.
120 V
400 W
3 - 5 mil
9.5"
To 3 Mil – 150 Seconds
To 5 Mil – 190 Seconds
3 to 5 Mil – 190 seconds
12" / Minute
• Press power button to turn unit on
and select the appropriate tempera-
ture setting
• LAM95: Pull jam release lever and
remove item through the front in-feed
slot
• LAM95FH, LAM125FH: Press and hold
the reverse (REV) button on the control
panel while removing the item through
the front in-feed slot
• Ensure item is centered at the in-feed
slot and fed straight through the
laminator with the sealed edge first
• Always use a pouch when laminating
• Run cleaning sheet through laminator
after each use
• Never feed an empty pouch or use
self-adhesive laminating sheets
LAM95FH
3.38 x 17 .00 x 6.88
7.26 lbs.
5 Ft.
120 V
1050 W
3 - 5 mil
9.5"
To 3 Mil – 60 Seconds
To 5 Mil – 90 Seconds
3 to 5 Mil – 30 seconds
24" / Minute
9
LAM125FH
3.38 x 21.75 x 7 .50
11.66 lbs.
6 Ft.
120 V
1750 W
3 - 5 mil
12.5"
To 3 Mil – 60 Seconds
To 5 Mil – 70 Seconds
3 to 5 Mil – 70 seconds
48" / Minute