Putting Detergent In The Washing Machine; Washing Clothes Using Fuzzy Logic - Samsung WF-J1254 Manual Del Usuario

PUTTING DETERGENT IN THE WASHING MACHINE

Before washing clothes for the first time, you must run a complete cycle without clothes.
To do this:
1. Press the POWER button.
2. Pour a little detergent into compartment
drawer.
3. Turn on the water supply to the washing machine.
4. Press the Start/Pause button.
• This will remove any water from the manufacturer's test run
remaining in the washer.

WASHING CLOTHES USING FUZZY LOGIC

Your new washing machine makes washing clothes easy, using Samsung's "Fuzzy Logic" automatic
control system. When you select a wash program, the machine will set the correct temperature, washing
time, and washing speed.
To wash clothes using the Fuzzy Logic programs:
1. Turn on your sink's water faucet.
2. Press the POWER button.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling.
5. Close the door.
6. Add the detergent, softener, and bleach(if necessary) into the appropriate compartment.
7. Turn the Fuzzy Control dial to select
the appropriate program for the type of
clothes. Normal, Colors, Perm Press,
Delicates, Wool, Handwash, Quick,
Rinse+Spin, Spin, Drain, Calm Wash,
Mixed Load, Heavy Duty, Towels.
You will see the indicators light up on
the control panel.
8. At this time, you can control the wash temperature, rinsing times, spin speed, delay time by
pressing the appropriate option button.
9. Press the Start/Pause button on the Fuzzy Control dial and the wash cycle will begin.
The process indicator will light up and the remaining time for the cycle will appear in the
display.
When the cycle is finished:
After all the cycles have finished, the power will turn off automatically.
1. Open the door.
The door will not open until 3 minutes after the machine stops or the power turns off.
2. Remove laundry.
Detergent
in the detergent
Washing a load of laundry _13
Bleach
Softener