Saivod HA-25 Manual Del Usuario página 17

PARTS OF THE APPLIANCE
1. Lid
2. Lid open button/s
3. Automatic on-off switch
4. Filter
5. Water level indicator
6. Kettle ON pilot light
7. Kettle
8. Connection base
BEFORE USING YOUR KETTLE
Before using your kettle for the first time or after a long period of disuse, fill to the maximum, boil and
then pour the water away.
HOW TO USE YOUR AUTOMATIC KETTLE
• Place the appliance on a dry, flat, stable surface.
• Open the lid by pressing the corresponding button/s and fill with the required quantity of water. The
water level should be between the 'MAX' and 'MIN' marks.
• Replace the lid and make sure it is properly fitted, otherwise the kettle will not switch itself off when
the water boils.
• Place the kettle on the base, plug into the mains and turn the on-off switch to the 'I' position. The kettle
ON pilot light will come on.
• The kettle will turn itself off when the water inside reaches boiling point.
• Do not add more water to the kettle while it is switched on.
• Do not leave water in the kettle for long periods or overnight.
WARNING: The kettle is equipped with a thermal safety mechanism that protects it against overheating
GB
in the absence of water or if the water level is below the indicated minimum mark ('MIN'). When this
happens, the kettle switches itself off automatically. Unplug the appliance from the mains, turn the
on-off switch to '0' and leave to cool before filling with water once again. When the kettle has cooled, it
should work normally. If this is not the case, contact an authorized technical assistance service.
CLEANING AND MAINTENANCE
After use, unplug the appliance from the mains and leave to cool.
Clean the base and the outside of the kettle with a damp cloth and dry thoroughly.
Do not use chemical products or abrasive detergents that may scratch the plastic coating.
Protect the connection base, cable and plug against humidity.
After repeated use, lime deposits may form on the inside of the kettle and interfere with its correct
working. These deposits can be removed using any kettle decalcifying products available on the market.
If you prefer, you can also decalcify your kettle with white vinegar. To do so, follow the instructions
outlined below:
• Place three cups of vinegar in the kettle and then fill with water. Leave the water-vinegar mixture to
17
HA-25.indd 17 8/26/2016 6:34:43 PM