Brandson Equipment DC Motor 305022 Manual Del Usuario página 31

Control panel Function
POWER ON/OFF // Function On/Off
Press the "OSC" button to turn on the oscillation of the fan.
By pressing the button repeatedly, you can shift through
the various oscillation modes. The following cycle: Angle:
60°→ Switch off → 90°→ Switch off → 120°→ Switch off →
60° etc.
This button can be pressed briefly to change the wind
speed. The button can be pressed for long time to change
the mode. (cycle: Normal -> Turbo -> Sleep -> Normal etc).
Display of the current speed
This button can be pressed briefly to enable and disable the
turbo mode.
The button can be pressed for a long time to turn the tem-
perature-dependent mode on and off.
In the turbo mode, the display is turned on and "H" is
shown on the screen.
In the sleep mode, this display is turned on, and the wind
speed of the fan can be automatically adjusted as per the
selected program. There are three speed levels, i.e. "1, 2,
3". And the required sleep wind speed can be adjusted by
pressing the "SPEED" button.
31
English